CFcadfitcheck.comOfficial download ↗
Independent guide · Last updated 2026-11-02

Install SolidCraft
after the fit check.

Installing SolidCraft means choosing the official package—or trying its browser app—then opening a small representative part to test your real workflow. Run the CAD Fit Check first so a download answers a project need instead of becoming a detour.

01 / BEFORE YOU INSTALL

Check the workflow first.

Short answer: choose the official download route only after you know what must work: the part you need to model, the operating system you use, the file handoff you need, and whether a browser trial is enough. CAD Fit Check helps you make that decision; SolidCraft’s official site and repository are the sources for the software.

For a first pass, use a representative but non-sensitive part. Write down the geometry, constraints, units, export format and downstream tool that matter. If the project depends on mature drawings, CAM, simulation, a particular import/export round trip or team-wide compatibility, validate that requirement before you commit to any new CAD tool.

02 / WINDOWS

Windows: use the official installer.

WINDOWS SECURITY

Read the current prompt

As of the official README checked for this guide, Windows downloads are not signed yet. The README says Windows may show SmartScreen and gives its current “More info” then “Run anyway” guidance. Re-check the README before acting because signing status can change.

FIRST RUN

Test a small part

After installation, open or create a simple representative part. Check that the view, parameters, save path and export route you care about behave as expected.

Source: official README Download section and the official download hub.

03 / MACOS

macOS: choose the disk image for your Mac.

PACKAGE

Use the official disk image

The official README documents a macOS disk image for Apple silicon and Intel. Start from the official download hub, which points to the current package rather than a fragile direct asset URL.

TRUST

Check current macOS guidance

As of the official README checked for this guide, the macOS app is signed with a Developer ID and notarized by Apple. Confirm the current package and instructions in the official sources before opening it.

FIRST RUN

Validate your actual handoff

Try the simplest part that still exercises your workflow. Confirm save, reopen, measurement and the export or collaboration step your project depends on.

Source: official README Download section; see the official docs for current usage guidance.

04 / LINUX

Linux: pick the package that matches your setup.

APPIMAGE

Portable desktop route

The official README lists a Linux AppImage. Use the official download hub or GitHub releases to get the current asset and follow the current installation notes.

SNAP

Package-managed route

The official README also documents installing the Snap package. Check the official instructions for the command and package details instead of relying on an old snippet.

OTHER PACKAGES

Check the current list

The official download hub may list additional Linux formats and architectures. Choose from that current list when your environment needs something other than the main AppImage route.

Source: official README Download section and the official download hub.

05 / NO INSTALL

Try the browser route first.

The official README and website document a web app, so you can try SolidCraft in a browser without installing a desktop package. This is useful for a quick fit check, a small experiment or a first look at the workflow. It does not automatically prove that your offline needs, local files, performance expectations or team handoff are covered.

Good sequence: run the Fit Check, try a small part in the official browser app, then install the desktop package only if the desktop route solves a requirement the browser route does not.

06 / AFTER INSTALL

Open one simple part before going deeper.

01

Confirm the basics

Create or open a small part, change one parameter, save it, reopen it and inspect a measurement. Use the current official docs when the UI or file behavior is unclear.

02

Test the handoff

Export the format your project needs and reopen it in the downstream tool. Check units, dimensions, topology and any metadata that matters before building a larger model.

03

Add MCP only if useful

If agent control is part of the fit, the companion SolidCraft MCP guide explains the documented local workflow and its boundaries.

Installation is complete when the workflow you actually need works—not merely when the app launches.

07 / FAQ

Fast answers.

Where should I download SolidCraft?+

Use the official SolidCraft download hub or the official GitHub repository and releases. CAD Fit Check is an independent guide and does not mirror installers.

Does SolidCraft have a Windows installer?+

Yes. The official README lists a Windows installer and the download hub lists the current Windows packages. Check the official installation notes for the package you choose.

Does SolidCraft run on macOS?+

The official README lists a macOS disk image for Apple silicon and Intel. Check the current download hub and installation guide for the package and instructions that match your Mac.

Can I try SolidCraft without installing it?+

Yes. The official README and website document a web app that runs in the browser, so you can try the browser route before installing a desktop package.

Is CAD Fit Check affiliated with SolidCraft?+

No. CAD Fit Check is an independent guide and is not affiliated with or endorsed by the SolidCraft maintainers.

RELATED

Keep the decision grounded.

Use the comparison page for a broader SolidCraft-versus-FreeCAD decision, the MCP guide for agent control, and the methodology page for how this site frames project fit.